BATCHING
Batching plants for various products by either weight or volume systems.
Modular and personalised constructions for individual needs.
Various grades of automation from semi-automatic to the most advanced
automation with both electromechanic and electronic weighing system.
Usage of planetary mixers and other types with capacity from 100 to 750 litres.
Various accessories.
OCEM Hermetic presses.
Bench and multi station rotative presses.
Complete range with pressing power from 50 up 1000 tons and with production capacity suitable for small firms and the largest production lines even above 200 square metres, per hour.
Facility to produce materials with various thickness from extra thin to over 100 mm in various dimension and shapes up to a maximum of 1000 mm X 1000 mm.
Moduls, doser and various accessories.
HANDLING
Take off equipment from the press as well as feeding equipment for
cured tiles.
The stacking of the tiles can be obtained in two ways. Flat stacking
on trays (LINEAR series) or "edge" stacking on pallets (VERTIMATIC
series).
Both systems enjoy the possibility of combining the off loading of
the newly pressed tiles with the handling of the cured tiles by a
single unit or, if preferable, by two independent units.
Individual requirements can also be catered for.
Tray and pallets of various types and sizes, and accessories.
GRINDING & CALIBRATING
Linear type.
Modular construction incorporating from 1 to 10 working heads. Useful working width from 500 mm. (90 series) up to 700 mm. (3000 series) and with a useful working height up to 400 mm.
Usage of silicon carbide or diamond wheels.
Production capacity ranging from small firms to large producers as part of automatic lines.
Power installed up to 500 HP.
Accessories and grinding products.
POLISHING
Linear Polisher..
Modular construction incorporating a maximum of 12 heads. Maximum
useful working width 700 mm. Maximum useful working height 400 mm.
Mobile or fixed bridge.
Pneumatically controlled working pressure with "floating"
polishing plates using polishing stones type "Frankfurt"
or similar..
Various accessories
Linear or "L" Shaped Chamfering Machines.
Useful working width from 200 to 600 mm. Useful working height up
to a max of 300 mm.
Bevelling and possibility of "squaring" the four edges
in two operations.
Usage of abrasive wheels (heads are pneumatically controlled) or
diamond wheels (heads are mechanically set in fixed positions).
The bevelling operation is performed from above.
